Riddhi Pharma Machinery Limited Mumbai, Maharashtra

Tablet Press

Vibro Sifter 30

Vibro Sifter 30
  • Vibro Sifter 30
  • Vibro Sifter 30

Approx. Rs 75,000 / Unit


Vibro Sifter

We manufacture Sieving and Grading Machine.

We are the leading supplier of Vibro Sifter 20", 30",48" , 60".

 

Specification:



Additional Information:

High Speed Tablet Press

High Speed Tablet Press
  • High Speed Tablet Press
  • High Speed Tablet Press
  • High Speed Tablet Press

Approx. Rs 19 Lakh / Unit


Riddhi Press II

Salient Features

  1. Riddhi Press Mark II is a high speed Rotarytablet press for higher table output, suitable for large batch production.
  2. Machine is having a square design with total consideration of GMP standards.
  3. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone.
  4. The machine is having elegantly designed cabinet top of SS-304.
  5. The machine is having round hoppers of SS-304 with Butterfly valve.
  6. The machine is having A.C. variable frequency drive for the main motor.
  7. Machine is also having A.C. variable frequency drive for force feeding motors, which enables operators to synchronize machine's speed & feed both.
  8. The machine is having Electromagnetic clutch arrangements.
  9. The machine is having one piece turret of special grade casting. However, three piece turret with SS-304/SS-316 middle plate is also available (optionally). Electro less nickel plating can also be available to the turret, (optionally).
  10. Lower punch seals are provided at lower punch hole in turret.

Technical Specification

ModelsRDIID-37RDIIB-45RDIIBB-55RDIIBB-61
ToolingDBBBBB
No . Of Stations37455561
Max . Output(Tab/hr)222,000324,000395,000438,000
Max . Operating Pressure(Main)100 kN65 kN65 kN65 kN
Max . Tablet Dia25 mm17.5 mm17.5 mm17.5 mm
Max . Depth of Fill20.5 mm15.9 mm11.1 mm11.1 mm
Upp.Punch Penetration3.2 to 8 mm3.2 to 8 mm3.2 to 8 mm3.2 to 8 mm
Main Motor6 HP/ 1440 RPM / 3 PHASE / A.C.
Force Feeder Motor0.25 HP/2800 RPM/ 3 PHASE / A.C.
Total Power9.5 HP / 3 PHASE / A.C.
Overall Dimensions148 x 141 x 188(H)(Cms.) Approx.
Net Weight2250 Kgs.

Additional Information:

Tablet Press - Riddhi Press-IV (45 D Tooling - 75 Bb Tooling

Approx. Rs 25 Lakh / Unit


Salient Features
  1. PLC operational controls (optional).
  2. Sturdy outstanding engineering design to meet large batch production.
  3. Synchronization port for turret RPM and feeder RPM.
  4. AC variable frequency drive for main and feeder motor.
  5. Designed for quick changeover.
  6. Built in pre-compression and force feeder.
  7. Easy front controls for tablet weight hardness and pre-compression.
  8. Inbuilt Control Panel.
  9. Hydraulic pressure overload mechanism.
  10. Guards with interlock with transparent acrylic frameless guards.
  11. Auto lubrication with fine turning valve and timer.

Technical Specification
ModelsRDD-45RDB-55RDBB-69RDBB-75
ToolingDBBBBB
No . Of Stations45556975
Max . Output(Tab/hr)3,25,0003,96,0004,97,0005,40,000
Max . Operating Pressure(Main)10 Tons6.5 Tons6.5 Tons6.5 Tons
Pre-Compression1 Ton1 Ton1 Ton1 Ton
Max . Tablet Dia25 mm16 mm11.1 mm11.1 mm
Max . Depth of Fill20 mm17.4 mm17.4 mm17.4 mm
Main Motor10.HP.3 .A . C.10.HP.3 .A . C.10.HP.3 .A . C.10.HP.3 .A . C.
Total Power12.HP.3 .A . C.12.HP.3 .A . C.12.HP.3 .A . C.12.HP.3 .A . C.

Additional Information:

Tablet Press - Double Rotary Tablet Press Rmb4 (27 D Tooling)

Tablet Press - Double Rotary Tablet Press Rmb4 (27 D Tooling)
  • Tablet Press - Double Rotary Tablet Press Rmb4 (27 D Tooling)
  • Tablet Press - Double Rotary Tablet Press Rmb4 (27 D Tooling)

Approx. Rs 6.5 Lakh / Unit


Salient Features
  1. Redesigned variable speed pulley.
  2. Seperate centre pillar of C.I. graded casting.
  3. Turret of C.I. graded casting.
  4. Very rigid Gun metal Feed frame (both identical) with sufficient height to avoid spill over powder.
  5. All columns, nuts and fly wheel rim are Electroplated.
  6. Turret with key slots, essential for shaped tooling provided on 27, 33, 35 37 station machine (optional on 41 45 station machine.)
  7. Central oil lubrication system with hand pump.

Technical Specification
ModelsRDMD4-27RDMB4-35RDMB4-45
No . Of Stations273545
Tooling"D""B""BB"
Output Tablets Per Min.900-22681167-29401500-3781
Max . Depth of Fill20 mm17.4 mm17.4 mm
Max . Tablet Dia25 mm16 mm11 mm
Max. Upper Punch Entry8 mm8 mm8 mm
Min. Upper Punch Entry1.5mm1.5mm1.5mm
Max . Operating Pressure(Main)6.5 Tons6.5 Tons6.5 Tons
Main Motor5HP/1440 RPM / 3Õ5HP/1440 RPM / 3Õ5HP/1440 RPM / 3Õ
Overall Height1790mm1790mm1790mm
Overall Width1000mm1000mm1000mm
Overall Depth1040mm1040mm1040mm
Net Weight1143 Kgs1143 Kgs1143 Kgs

Tablet Press- Double Rotary Tablet Press ( 27 D Tooling - 4

Tablet Press- Double Rotary Tablet Press ( 27 D Tooling - 4
  • Tablet Press- Double Rotary Tablet Press ( 27 D Tooling - 4
  • Tablet Press- Double Rotary Tablet Press ( 27 D Tooling - 4

Approx. Rs 6 Lakh / Unit


Double Rotary Tablet Press

We manufacture one of the state of art Tablet press as per the needs and sizes of tablets required by the customer. 

Salient Features
  1. With handwheel and Re-designed variable speed pulley.
  2. Turret of SG special grade casting.
  3. Central oil lubrication system with hand pump.
  4. Sturdy and easy fit feed Frame.
  5. Machine can be equipped to compress two-layered tablets (Optional).
  6. Totally enclosed design reduces noise level and to flow of dust between compression zone and environment.
  7. Anti vibration mounting provided, hence no foundation required.
  8. Higher turret speed 15 to 42 RPM.
  9. Fly over on upper punch is provided to avoid the jumping of upper punches.
  10. Reverse direction motion protection is provided to avoid major accident.
  11. Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for Frictionless rotation.
  12. Aluminium covers for rotor teeth.

Technical Specification
ModelsRDB3D-27RDB3B-27RDB3B-35RDB3B-45
Tooling"D""B""B""BB"
No . Of Stations27273545
Max . Output(Tab/hr)136.080136.080176.400226.800
Max . Pressure10 Tons6.5 Tons6.5 Tons6.5 Tons
Max . Tablet Dia25 mm16 mm16 mm16 mm
Max . Depth of Fill17.5 mm17.5 mm17.5 mm11.1 mm
Electncals3HP. 3 .A C.3HP. 3 .A C.3HP. 3 .A C.3HP. 3 .A C.


Additional Information:

Single Rotary Tablet Press

Single Rotary Tablet Press
  • Single Rotary Tablet Press
  • Single Rotary Tablet Press

Approx. Rs 5.25 Lakh / Unit


Lab Model Tablet Press

Approx. Rs 2.75 Lakh / Unit


Mini Press or Lab Model Tablet Press or R & D Tablet Press.
We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manufacture a variety of Tablet Press from small to volumes to large volumes. We make Lab Model Tablet Press which is popularly known as Mini Press or Mini Tablet Press. There are 2 models one is with pre-compression with front controls and other one without. Pharmacy College, R & D companies and small Laboratories buy this. Colleges use this Mini Press or Lab Model Tablet Press to demonstrate the students as to how the tablet is compressed. Mini press has 8 station D tooling 10 station B tooling.

Additional Information:

Single Sided Rotary Press

Single Sided Rotary Press

Approx. Rs 5 Lakh / Unit


We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manufacture a variety of Tablet Press from small to volumes to large volumes. We have different Tablet Making Machine for various industry requirements, Single Rotary Tablet Press comes in 3 models RDD3-16, RDD3-20, RDD3-23. In Single Rotary Tablet Press 16 station D tooling is the most popular model, and sturdy model. We also manufacture 12 station Single Rotary Tablet Press for Veterinary Manufacturers, you can manufacture Bolus tablets of 40 mm dia. and 30 mm depth of fill, this model comes with 12 tons pressure and is very widely used by Veterinary Manufacturers.

Tablet Press - Mini Press- Lab Model

Approx. Rs 2.5 Lakh / Unit


Mini Press or Lab Model Tablet Press or Research and Development Tablet Press

Salient Features

  1. Portable tablet press needs for compression of small batches.
  2. Designed to suit the needs of R D sections and Pharmacy colleges.
  3. Drive from center Pillar by worm gearbox ensures perfect transmission
  4. Controlled by AC variable frequency drive.
  5. Turret fitted with thurst bearing at the top bottom.
  6. Equipped with inbuilt Pre-Compression and force Feeder (Lab Press II Machine)
  7. Anti-vibration mounting provided, hence no foundation required.

Technical Specification
ModelsRDB4- 10-IRDD4-8-IRDB4-10-IIRDD4-8-II
No . Of Stations108108
ToolingBDBD
Max . Output(Tab/hr)18.00014.40018.00014.400
Max . Pressure4 Tons4 Tons4 Tons4 Tons
Pre-Compression--1 Ton1 Ton
Max . Tablet Dia16 mm25 mm16 mm25 mm
Max . Depth of Fill17.4 mm17.4 mm17.4 mm17.4 mm
Electncals1.5HP.Single .ac.1.5HP.Single .ac.1.5HP.Single .ac.1.5HP.Single .ac.

Additional Information:

Tablet Press - Heavy Duty Single Punch Tablet Press Up to 90

Tablet Press - Heavy Duty Single Punch Tablet Press Up to 90
  • Tablet Press - Heavy Duty Single Punch Tablet Press Up to 90
  • Tablet Press - Heavy Duty Single Punch Tablet Press Up to 90
  • Tablet Press - Heavy Duty Single Punch Tablet Press Up to 90

Approx. Rs 3 Lakh / Unit



Additional Information:

Tablet Press Turret

Approx. Rs 79,000 / Unit


Turret for Tablet Presses

We manufacture Turret for all type of Tablet Press like Cadmach, Clit, Chamunda, Riddhi, CIP, Cemach . Please send us your enquiry with all the details.


Additional Information:

300 CFM Tablet Dust Extractors

300 CFM Tablet Dust Extractors
  • 300 CFM Tablet Dust Extractors
  • 300 CFM Tablet Dust Extractors

Approx. Rs 1.35 Lakh / Unit


Dust Extractors 300 CFM MODEL RDDE - 300

It is essential to use Dust Extraction unit along with Riddhi press to control the flying dust generated during the High-speed compression of tablets. With the use of this, flying dust is kept to a minimum but it is difficult to eliminate it entirely.

Technical Specifications


Additional Information:

Tablet Deburring and Dedusting Machine

Tablet Deburring and Dedusting Machine
  • Tablet Deburring and Dedusting Machine
  • Tablet Deburring and Dedusting Machine
  • Tablet Deburring and Dedusting Machine

Approx. Rs 60,000 / Unit


Tablet Deburring and Dedusting Machine with Brushing Unit

We manufacture tablet deburring and dedusting machine with brushing unit on demand or without brushing unit.

· SALIENT FEATURES :

 

1.

Noiseless Maintenance free unit.

2.

Electric power requirement less then other machines of the kind.

3.

Height adjustment facility provided with the unit to suit with any Rotary Tableting Machine.

4.

All contact parts made of S.S. 316 and components can be easily washed and/or sterilized.

5.

Tablet conveying route is so geometrically designed for imingement of tablets on their burrs, which can break easily.

6.

Efficient De-Burring De-Dusting and full suction output is concentrated on De-Dusting zone for flushing out powder.

· TECHNICAL SPECIFICATIONS :

Model

RDDB-300

Output *

5,000 to 2,50,000 tablet / Hr.

Electric Motor

0.25 Hp. / 3 Phase / 1440 RPM / 440 V.

Electric Motor (Brushing Unit)

0.25 Hp. / 3 Phase / 1440 RPM / 440 V.

Max. Tablet Diameter

40 mm

Min. Tablet Diameter

5 mm

Net weight (Approx.)

125 Kgs.

Gross weight (Approx.)

275 Kgs.

Overall Dimension (mm)

400 (L) x 530 (B) x 800 (H)

Overall Dimension (mm)
With Brushing Unit

500 (L) x 630 (B) x 900 (H)

Case Dimension (mm)

500 (L) x 630 (B) x 900 (H)

Case Dimension (mm)
With Brushing Unit

500 (L) x 500 (B) x 900 (H)

 


Additional Information:

Horizontal Tablet Deburring and Dedusting Machine

Horizontal Tablet  Deburring and Dedusting Machine

Approx. Rs 1.75 Lakh / Unit


Horizontal Tablet Deburring and Dedusting Machine

We manufacture horizontal deburring and dedusting machine which removes burrs from the tablet , the tablet travels in a horizontal manner and the rotating sieve removes and the dust gets extracted by dust extractor . It is directly connected to tablet press.

Additional Information:

Pharmaceutical Machinery Spares for Tablet Press

Pharmaceutical Machinery Spares for Tablet Press
  • Pharmaceutical Machinery Spares for Tablet Press
  • Pharmaceutical Machinery Spares for Tablet Press

Approx. Rs 10,000 / Unit


We manufacture Pharmaceutical Spares for all type of Pharmaceutical Machinery like Tablet Press, Multi Mill, Oscillating Granulator, Drum Blender, Communiting Mill, Roll compactor, fluid bed dryer, tray dryer, vacuum tray dryer, vibro sifter, sieves for vibro, multi mill, communiting mill , cone mill

Additional Information:
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Tablet Press ?

    country-ico

    We will contact you soon !

    Hiten Shah

    (Marketing Director)

    Riddhi Pharma Machinery Limited

    Andheri East, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us