Approx. Rs 1.05 Lakh / Unit
RIDDHI LAMI / PLASTIC TUBE SEALER & CUTTER MANUAL
It consists of two Pneumatic Cylinders Fixed with sealing jaws The Filled tube is placed in-between the jaws the jaws are made to come closer as soon as a button is pressed. The heating time, holding time etc is automatically controlled. As No. Pedal is to be pressed, we have given push button for tube sealing and tube trimming, the sealing time is constant and controlled automatically and you need not depend upon the operator and hence the sealing quality will be consistent.
The full set up will be fixed on a stand so that it is slid able up and down and can be fixed at a desired length. Depending upon the length of the tube. The whole setup will be mounted on a plated Ms Stand. The machine will be supplied with 3 pair of tube holders for keeping the tube inside the holder. The operator should ensure that the cream does not touch the sealing portion of the tube while filling manually else, it will give rise to a weak sealing.
TRIMMING & CODING UNIT
It Consists of a standard make Pneumatic Cylinder and fixed with cutter blades. There is a provision for fixing code nose for batch coding. As soon as a pushbutton or a pedal switch is pressed the Cylinder actuates and trim the irregular portion and as well the code nos get embossed.
Set the temperature to 160 degree and see the tube sealing, if tube deformed that means the temperature is high, then decrease the temperature and if sealing not ok, then increase the temperature step by step.
Tube trimming timing to be kept 3 to 4 second depending on the tube.
Batch code to put in trimming station .
Note : please do touch the sealing jaws during operation , otherwise accident , also do not put your hand during sealing and cutting.
Your scope of supply :
1. Electrical single phase with earthing 220 volt 50 hertx
2. Air compressor 6 kg pressure, 4 to 5 cfm , clean and filtered air , with moisture removal.
We will contact you soon !
Riddhi Pharma Machinery Limited
Andheri East, Mumbai,